José Antonio Martínez asked 1 year ago
Hello,
I have been working normally with the course learn esp32 with Arduino, and sudently I Have no way to connect with the esp32. I am using the one recommended by you (doit esp32 devkit v1). I have updated the driver, the library and I have tried with the Mac, and Pc.
In Mac the message is (port cu.usbserial-0001)
A fatal error occurred: Could not open /dev/cu.usbserial-0001, the port doesn’t exist
Failed uploading: uploading error: exit status 2
and with the other port (cu.SLAB_USBtoUART)
A fatal error occurred: Could not open /dev/cu.SLAB_USBtoUART, the port doesn’t exist
Failed uploading: uploading error: exit status 2
With pc I am no able to connect de port COM4
Can anyone help me please. thanks in advance
Sara Santos Staff answered 1 year ago
Hi.
Does the COM port shows up on your computer? Is the USB cable in good condition or is it damaged?
What error do you get on PC?
I’m not used to program using MAC OS. So, if you tell me the error you get on your PC, maybe I can better understand what might be causing the issue.
Regards,
Sara
José Antonio Martínez answered 1 year ago
hello Sara,
thank you very much for your soon answer
when I connect to the pc the COM4 appears an disappears constantly from the dialogue box, and I am no able to select the port.
Maybe I buy a connection cable, do you have any suggestion for a good quality conection cable?
Thanks in advance
Sara Santos Staff answered 1 year ago
Hi.
It seems an issue with the USB ports or cable.
Are you using a USB Hub? Sometimes they don’t work well to connect the ESP32 boards and other peripherals at the same time, like your mouse, for example.
Is the connector a bit loose on the port or does it feel tight?
We just use regular USB cables, usually the ones that come with the boards. Any regular cable with data wires should work.
Regards,
Sara
José Antonio Martínez answered 1 year ago
thank you Sara
I bought anode card y and cable and now works on the pc at the port COM4 it seems I forced the connection with a not suitable cable and I damaged the esp32.
Thank your very much for your help
Sara Santos Staff answered 1 year ago
I’m glad the issue is solved.
I’ll mark this issue as resolved. If you need further help, you just need to open a new question in our forum.
Regards,
Sara